11° GAVnt - Ursae Minoris - UM i

11° GAVnt - Ursae Minoris - UM i

Grupo de Aviação de Veículos não Tripulados


    FFA -Missão Introdutórias 01 - Iniciar aeronave

    Compartilhe
    avatar
    Cnshark
    Admin

    Mensagens : 1292
    Data de inscrição : 25/01/2011
    Idade : 43
    Localização : Tubarão

    FFA -Missão Introdutórias 01 - Iniciar aeronave

    Mensagem  Cnshark em Qui Mar 03 2011, 15:26

    Saudações

    Exercício 01

    Bem vindo ao exercício número 01, que inicia a aeronave para vôo, com checagem dos instrumentos e ativação de todo sistema elétrico, motores, sistemas hidráulicos e radio frequência.



    Missão de iniciar uma aeronave em ramp start



    Iniciar da rampa para este exercício, lembrando que a sequência deve ser seguida para ativação dos componentes elétricos/hidráulicos da aeronave, pois não queremos danificar componentes essenciais e nem mesmo inciar um incêndio causando uma explosão letal para o piloto e pessoas/aeronaves próximas.

    Primeiro passo:(entrando na realidade) Visualizar quaisquer anomalias na fuzelagem, trem de pouso, entrada e saída da turbina, botões externos, tampas externas "se bem fechadas", flaps, Asas, aileron,retirar "travas de rodas", retirar "avisos nos instrumentos externos" . Ao entrar na aeronave, checar visualmente se não há danos superficiais nos controles e botões, checar sinto de segurança e fivelas (ajusta-los), observar o canopy e qualquer alteração no ambiente do cockipit do piloto.
    Checar se todos os instrumentos estão desligados.

    Procedimento INICIAL:


    1. MAIN PWR - BATERIA "BATT"-CHECK LUZ DE AVISO"ATIVAR"
    2. MAIN PWR - Flcs RELAY "ON"
    3. MAIN PWR - POSIÇÃO "MAIN" CHECK LUZ

    4. Parking Brake - ATIVE
    5. Master LIGHT switch - "NORM"
    6. LUZ DE ANTI-COLISÃO - ATIVE POSIÇÃO "ON"
    7. LUZ FLASH - ATIVE POSIÇÃO "FLASH"
    7. Master FUEL Switch - ATIVE PARA "NORM"
    8. FUEL Pumps - ATIVE PARA "NORM"
    9. Fuel Readout Switch - ATIVE PARA "NORM"
    10.EPU Switch - ATIVE PARA "NORM"
    11.AIR Source - ATIVE PARA "NORM"
    12.Avionics - DESATIVADOS
    13.Sensors - DESATIVADOS
    14.SEAT - ASSENTO "ARMADO"
    15.WARNING PAINEL - "ELECSYS ON" "SEC ON" "HYD OIL ON"
    16.EPU – “OFF” DESLIGADA
    17.RADIOS E INTERCON “LIGADOS” COM VOLUME CONFORME AJUSTE NECESSÁRIO


    PROCEDIMENTO PARA INICIAR O(S) MOTORE(S)

    1. Throttle - PISIÇÃO “0” IDLE -ACELERAÇÃO MÍNIMA

    2. JFS /APU– ATIVE POSIÇÃO 02
    3. RPM (INSTRUMENTO) – INICIA PROCESSO ATÉ 25%
    4. Throttle - AUMENTAR ACELERAÇÃO ACIMA DE 30%
    5. Idle Detent – ATIVE O BOTÃO IDLE DETENT
    6. RPM (INSTRUMENTO) – AUMENTO DE ROTAÇÃO ACIMA 25%
    7. Throttle – POSIÇÃO “0” IDLE- ACELERAÇÃO MÍNIMA
    8. 50% RPM – INTERRUPTOR (JFS) POSIÇÃO “OFF”
    9. 55% RPM – BATERIA (MAIN GEN) LUZ DESLIGADA “OFF”
    10.HYD OIL light–AVISO PAINEL LUZ DESLIGADA “OFF” APÓS 70% RPM

    CHECK. luzes de painel de avisos


    APÓS INICIAR MOTORES

    1. D/Link - ATIVAR
    2. GPS – ATIVAR
    3. UFC / ded – ATIVAR
    4. MFD - ATIVAR
    5. SMS - ATIVAR
    6. FCC – ATIVAR
    7. INS – POSIÇÃO “ALGIN NORM” – DADOS E COORDENADAS
    8. FCR - ATIVAR
    9. Left/Right Hardpoints – ASAS -ATIVAR
    10.RALT – ATIVAR POSIÇÃO “STAND-BY”
    11.HUD – ATIVAR
    11.HUD – MODIFICAR BRILHO CONFORME CONFIGURAÇÃO PESSOAL
    12.Trim – ZERAR “RESET”

    CHECK. luzes de painel de avisos

    MOTOR CHECK

    1. FLUEL FLOW - 500 – 1500 RPM
    2. RPM - 60 – 70 %
    3. FTIT (INSTRUMENTO) – INFERIOR A 575°
    4. Hyd Oil – LUZ DE AVISO DESLIGADA
    5. Engine Gauges - AVISO VERDE


    FLUEL CHECK

    1. TOTALIZER QTY – CHECK DE ACORDO COM O PLANO DE VÔO
    2. NORM – A/L 32000 LBS – F/R 37000LBS
    3. TEST – TOT: 6000 LBS A/L – F/R: 2000 LBS
    4. RSVR – BOTH 480 LBS – MARQUE SISTEMA DED CONFORME PLANO DE VÔO
    5. INT WING – BOTH 500 LBS
    6. EXT WING – BOTH 2420 LBS (TANQUES EXTERNOS)
    7. EXT CTL – F/R: 1700 LBS - CHECK 95 -102%

    AVIONICS

    1. Threat Warning Aux - ATIVAR
    2. EWMS *
    EWS PWR - ATIVAR
    EWS JMR - ATIVAR
    Chaff CMDs – ATIVAR
    Flares CMDs - ATIVAR
    EWMS Mode – SELEÇÃO REQUERIDA
    3. Check CNI switch – CHECK “UFC”
    4. DED – UFC *
    Comms – SELECIONAR UHF E VHF
    ALOW – SELEÇÃO REQUERIDA
    MSL (trans alt) – SELEÇÃO REQUERIDA
    CRUS – SELEÇÃO “HOME” BASE ALPHA
    TACAN – SELEÇÃO PARA BASE ALPHA “HOME”
    BINGO – SELEÇÃO REQUERIDA
    VIP – VRP – SELEÇÃO REQUERIDA
    WSPAN – SELECIONAR E CHECAR
    5. MFD *
    S – Jettison – ATIVO SELECIONADO
    Flightplan – CHECK E SELECIONE
    6. AUDIO *
    COMM1 Volume - SELECIONAR
    COMM2 Volume - SELECIONAR
    MSL Threat Volume - SELECIONAR
    Threat Volume - SELECIONAR

    Repetir procedimento sem fechar canopy e pressurizar cabine

    Radio ADF Navigation
    VHF Radios


    Front dash, navigation mode select panel ILS and TCN buttons Disengage
    Left console, VHF radio head Mode Selector knob Set to DF
    Left console, VHF radio head Frequency switches Set ADF frequency
    Font dash, navigation mode select panel VHF Light Confirm lit
    Front dash ADI Steer towards Bank Steering bar and monitor Pitch Steering Bar regarding ADF signal strength

    UHF Radio

    Left console, UHF radio head Function Select switch Set to ADF
    Left console, UHF radio Frequency switches Set ADF
    head frequency
    Font dash, navigation mode select panel UHF Light Confirm lit
    Front dash HSI Follow Bearing Pointer 1 steering

    Waypoint Selection
    Right console, AAP panel PAGE dial Set to WAYPT
    Right console, Waypoint Page Enter name of
    CDU Waypoint in scratchpad and press top right line select key.
    Right console, CDU Waypoint Page Enter ID number of Waypoint in scratchpad and press top left line select key.


    Embedded GPS INS (EGI) Navigation Panel Controls Operation
    Creating New Waypoint

    Right console, AAP panel PAGE dial Set to WAYPT
    Right console, CDU PAGE display Select Waypoint branch
    Right console, CDU Waypoint Info page Select Copy (?xx) function to create new Mission waypoint
    Right console, CDU Waypoint Info page Enter elevation of new waypoint in scratchpad and press EL line select key
    Right console, CDU Waypoint Info page Enter latitude of new waypoint in scratchpad and press N/S line select key
    Right console, CDU Waypoint Info page Enter longitude of new waypoint in scratchpad and press E/W line select key
    Right console, CDU Waypoint Info page Enter unique name of new waypoint in scratchpad and press name field line select key


    Set Steerpoint

    Right console, AAP panel PAGE dial Set to STEER
    Right console, CDU Steerpoint Info page Cycle with ± rocker on CDU
    HUD HUD as SOI DMS Up and Down



    Set Anchor Point

    Right console, AAP panel PAGE dial Set to WAYPT
    Right console, CDU PAGE display Select Anchor Pt branch
    Right console, CDU Anchor Point Info page Enter name of Waypoint in scratchpad and press top right line select key.
    Right console, CDU Anchor Point Info page Enter ID number of Waypoint in scratchpad and press top left line select key.



    Mark Creation and Cycling

    Right console, CDU MK (Mark Point) button Press to create overhead Mark Point
    TDC, TAD Cursor, TGP, and Maverick Designation point TMS Right Short to set Mark Point
    Right console, AAP panel STEER PT dial Set to MARK
    Right console, CDU ± Rocker switch Press to cycle Mark Points
    HUD HUD as SOI DMS Up and Down to cycle Mark Points


    Create Flight Plan

    Right console, AAP panel PAGE dial Set to OTHER
    Right console, AAP panel STEER PT dial Set to FLT PLAN
    Right console, CDU FPM Function Select Key Press
    Right console, CDU FPM Info Page Enter name of new FP in scratchpad and press NEW FP line select key
    Right console, CDU FPM Info Page Press line select key of new flight plan
    Right console, CDU FPM Info Page Press FPBUILD line select key
    Right console, CDU Flight Plan Build page Enter waypoint number of waypoint to be added to plan in scratchpad and press line select key of flight plan slot
    Right console, CDU Flight Plan Build page Repeat to add all waypoints of new flight plan


    PAINEL DE CONTRA-MEDIDAS ELETRÔNICAS - GUERRA ELETRÔNICA

    Mode Select - dial Set to STBY
    DISP switch -Set to MENU
    CHAFF, FLAR, INTV, or CYCL SET button Press to enter value
    Next (NXT) rocker switch Press to adjust value
    Return (RTN) button Save data
    DISP switch Set to ON
    RWR switch Set to ON
    JMR switch Set to ON
    MWS switch Set to ON

    SELEÇÃO DE ARMAS

    Master Arm switch Set to OFF
    GUN/PAC switch Set to OFF
    LASER switch Set to OFF
    DSMS Status page
    Review store loading and resolve errors

    CONFIGURAÇÃO DE ARMAS
    DSMS Profile page MDF - Select desired profile using OBS 19 and 20
    DSMS Profile page Set selected profile as active by pressing ACT PRO OSB 17
    DSMS Profile Control page Set release control as desired. Enter value in scratchpad and press OSB next to setting
    DSMS Settings page Set release settings as desired. Enter value in scratchpad and press OSB next to setting


    Manual Profile Select
    Front dash, MFCD DSMS Status page Press OSB next to weapon station


    HUD Rotary Profile Select
    HUD HUD as SOI Press DMS Left and Right to cycle through profiles on HUD rotary

    WEAPON DELIVERY
    CCIP Consent to Release (CR) Mode

    IFFCC switch Set to TEST
    IFFCC Test Menu Set CR option to 5 MIL or 3/9
    IFFCC switch Set to ON
    Master Arm switch Set to ARM
    MFCD DSMS OSB Press
    DSMS Status page Press PROF OSB 1
    DSMS Profile Main page Press OSB 19 and 20 to select profile
    DSMS Profile Main page Press ACT PRO OSB 17
    DSMS Profile Main page Press VIEW PRO OSB 3
    DSMS Profile Control page Set release settings
    DSMS Profile Control page Press CHG SET OSB 16
    DSMS Settings page Set release settings
    Master Mode Select Button Cycle to CCIP
    HUD symbology Align reticle over target and press and hold weapon release button
    HUD symbology Maneuver aircraft such that solution cue passes through pipper



    Laser-Guided Bomb


    TGP switch Set to ON
    LASER switch Set to ARM
    MFCD TGP OSB Press
    TGP STBY page Press A-G OSB 2 or A-A OSB 3 for Ground or Air modes
    Slew switch Slew TGP line of
    throttle sight over target
    Control stick TMS Forward Long Set as SPI Press TMS Forward Long
    Front dash, AHCP Master Arm switch Set to ARM
    Font dash, MFCD MFCD DSMS OSB Press
    Front dash, MFCD DSMS Status page Press PROF OSB 1
    Front dash, MFCD DSMS Profile Main page Press OSB 19 and 20 to select profile
    Front dash, MFCD DSMS Profile Main page Press ACT PRO OSB 17
    Front dash, MFCD DSMS Profile Main page Press VIEW PRO OSB 3
    Front dash, MFCD DSMS Profile Control page Set release settings
    Front dash, MFCD DSMS Profile Control page Press CHG SET OSB 16
    Front dash, MFCD DSMS Settings page Set release settings
    Control stick Master Mode Select Button Cycle to CCRP Press Master Mode Select Button
    HUD HUD symbology Align reticle over ASL and hold weapon release button down. Press Weapon Release Button
    Control stick Laser fire switch Turn on Laser after bomb is released Press Nosewheel Steering Button
    Front dash, MFCD TGP Maintain TGP line of sight to target during bomb time of flight




    IAM-Guided Bomb


    Designation device Set SPI using steerpoint, TDC,
    TGP, TAD or Maverick (TMS Forward Long)
    Left console, AHCP Master Arm switch Set to ARM
    Font dash, MFCD MFCD DSMS OSB Press
    Front dash, MFCD DSMS Status page Press PROF OSB 1
    Front dash, MFCD DSMS Profile Main page Press OSB 19 and 20 to select profile
    Front dash, MFCD DSMS Profile Main page Press ACT PRO OSB 17
    Control stick Master Mode Select Button Cycle to CCRP Press Master Mode Select Button
    HUD HUD symbology Align reticle over ASL and hold weapon release button down. Press Weapon Release Button
    Control stick HUD symbology Bomb will release when release cue is between max and min range carets on reticle.


    Maverick


    Left console, AHCP Master Arm switch Set to ARM
    Front dash, MFCD MAV OSB Press
    Front dash, MFCD MAV page Power ON Maverick, press OSB 6. 3 minute alignment
    Font dash, MFCD MFCD DSMS OSB Press
    Front dash, MFCD DSMS Status page Press PROF OSB 1
    Front dash, MFCD DSMS Profile Main page Press OSB 19 and 20 to select profile
    Front dash, MFCD DSMS Profile Main page Press ACT PRO OSB 17
    Control stick Master Mode Select Button Cycle to CCIP Press Master Mode Select Button
    HUD HUD and MAV page Slew tracking gate over target and release slew to initiate tracking Move Slew Switch
    Control stick Weapon release button Press with target lock indicated by steady Pointing Cross Press Weapon release button



    Gun


    Left console, AHCP Master Arm switch Set to ARM
    Left console, AHCP GUN/PAC switch Set to ARM
    Control stick Master Mode Select Button Set mode to GUNS Press Master Mode Select Button
    Left console, throttle Coolie Hat up Set HUD as SOI Press Coolie Hat Up
    Control stick DMS Left or Right Short Select gunsight Press DMS Left or Right
    Control stick Trigger First stage enables PAC, second stage fires gun






    Rockets


    Left console, AHCP Master Arm switch Set to ARM
    Font dash, MFCD MFCD DSMS OSB Press
    Front dash, MFCD DSMS Status page Press PROF OSB 1
    Front dash, MFCD DSMS Profile Main page Press OSB 19 and 20 to select profile
    Front dash, MFCD DSMS Profile Main page Press ACT PRO OSB 17
    Front dash, MFCD DSMS Profile Main page Press VIEW PRO OSB 3
    Front dash, MFCD DSMS Profile Control page Set release settings
    Front dash, MFCD DSMS Profile Control page Press CHG SET OSB 16
    Front dash, MFCD DSMS Settings page Set release settings
    Control stick Master Mode Select Button Cycle to CCIP or CCRP Press Master Mode Select Button
    HUD HUD symbology CCIP: align CCIP pipper over target and press and hold weapon release button.
    CCRP: Align reticle over ASL and hold weapon release button down. Press Weapon Release Button








      Data/hora atual: Qua Out 18 2017, 11:40